10mW optical fiber detector is a high level quality tester that is applicable for long distance optical fiber fault test by engineers and outside operation workers. This well-production optical fiber detector brings great convenience in positioning fiber breaking point such as fracture or bend, inspection of OTDR blind zone, fiber recognition, and mechanical transition point optimization etc.
● Providing the most convenience in optic fiber tests. 10mW optical fiber detector projects a long test distance of about 5 km, allowing various fiber tests in optical communication, CATV project, PDS construction and maintenance, optical component manufacture and research, and fiber projecting production etc.
● Featured test tool with high performance. Available with both CW and MOD operation modes, this 650nm LD laser source powered optical fiber detector assures long inspection distance in work. It is easy to operation on various tests and inspection work.
Please keep 10mW optical fiber detector protected in the best condition no matter work or no use.
● Remove the battery out while no use of it. Keep the fiber connector covered, and placed in ventilated and dry.
● Keep the fiber optic connector and lens clean in operation.
● Don’t disassemble the device to avoid warranty.
|Name||Optical Fiber Detector|
|Frequency||2Hz / CW|
|Power source||2×AAA size batteries|
|Fiber mode||SM or MM|
|Optical Connector||2.5mm FC, SC, ST General interface|
|Material of shell||brass|
|Dimension||Ø14mm × L161mm|
|Weight||About 60g (without batteries)|
|Warranty Period||Six Months|